- Your Price
- Item #:
Introducing our high quality USB power outlet. This rugged unit has been designed especially for motorcycle use and provides two standard USB outlets rated at a tots of 2A that is more than enough for most applications. Unlike other units ours when installed in the GL1800 trunk switches off with the ignition to save your battery. Get away from those old cigarette type chargers Our direct wire version comes with a multi use clamp that can fit handlebars or flat locations. Fairing pocket version is plug and play All versions illuminate blue when powered Weather resistant.
Unlike the others, it took me about 30 mins to install this. But that counts running down to the hardware store to get the right size drill bit. I just got back from an all day ride in the country that fully drained my phone battery as the phone kept looking to find a tower while at the same time I was using the GPS. Batteries don't last long. I had bought this a few weeks ago but hadn't gotten around to installing it. It's in now and I won't have anymore issues with a dead phone. Very pleased.
Just got mine delivered and it came in a plastic bag without instructions. Installation was very easy and really didn't need instruction. I watched a video on installing 12V socket in left front pocket and followed that.
I installed it in my '12 in about 15 min. Unit works great. I went to big box hardware store and bought a 1 1/8 spade bit for $5.00 and was the perfect fit.
This took less then 15 minutes to install. Mine did have instructions in the box, but it was very basic. If you haven't ever taken the trim off the edge of the faring before, this may set you back a few minutes.
With the 2013 the edge trim is a little different and you need to start at the top and gently pull towards you and up. Keep working down and then the bottom of the trim has two over center clips that need to pop out. I had to work a flat screw driver down behind it to get it to pop off.
The back of the compartment is center marked where to drill. The hole needs to be 1 1/8", so I used a 1" hole bit and dremil sanded it bigger.
And we can't wait to show you how it's done!
Come visit our Southern California retail center!