- Your Price
- Item #:
Compact solid state electronic module converts your ordinary brake lights into your choice of two flashing modes. Creates attention getting visual alerting signals when you apply your brakes. Works with Incandescent Lighting, LED Lighting or a combo of both!
Easy Installation: Simply install the module in line with the brake light wire leading to the brake light and connect a ground wire. Sealed weather resistant heat sink case. Compact size: 2-1/4"L x 1-5/8"W x 5/8"H
NOTE: This module is rated at 10 Amps which will only drive three 1157 bulbs. If you have a vehicle with more than three brake lights, we recommend only modulating two of these bulbs. It will get plenty of attention
This compact solid state electronic module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes.
User Selected Mode One:
Emit a visual signal of 4 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to retain following drivers attention.
User Selected Mode Two:
Emit a visual signal of 5 short flashes, followed by a steady on light that remains steady as long as the brakes are applied.
Motorcycle Emergency Flasher of Automobile Back-Up Flasher.
Works great for me. I have mine set up so it flashes the spoiler light only right now. I plan to add the two unused lights on the trunk (they only operate as running lights from Honda) once I get the pins in to add a wire to the connector. For those of you having problems, make sure you read the max capacity on this. If your using regular bulbs and trying to power all the rear lights on the wing your likely overloading this past the 10 amp max. Pick which lights you want and use only them. The spoiler light is controlled by the green/red wire in the grey connector just in front of the relay box under the seat. It involves cutting a wire to run this in series with the lights but you can use connectors that will allow you to remove this and just plug the original wires back together if your state inspection rules prevent you from running this or if you ever feel like you may need to bypass this.
After seeing some complaints here, I am in a quandary as to why. I have written instructions if anyone would like them, which I made with PICTURES. I use just the trunk lights, as they are at eye level, and the best chance of getting noticed. Installation would be 30 minutes if you did it for the second time, and 2 hours for the first (assuming you are reading as you are doing the installation) I have had mine installed for several years and 20,000 miles with no issues. Email me through this forum, and include a direct email to you in the text as this BBS will not allow me to add an attachment. Happy Riding
Worked great for about a year. Then it quit and wouldn't even light my brake lights when I hit the brakes. Sent it to Manufacturer and they sent it back saying they tested it and it worked fine. I reinstalled it with same results. Does not work. No further help available from manufacturer. I won't buy another one of thiers, but I might buy another brand. The effect is great for safety (as long as it works.)
And we can't wait to show you how it's done!
Come visit our Southern California retail center!